All the models shown have;
Automatic
stopper It stops automatically if materials run out during operation.
Memory
Set-length,
set-quantity & set-speed are not erased even if power is switched off &
on.
All are available 220v for Europe and 110v for USA and Canada.
TUF-40S Ultrasonic Label Cutter and Folder
Ultrasonic cutter for high
quality soft edge labels.
With button switching, you
can cut and fold strip-labels automatically and neatly
Strip-labels with max. 47mm wide
can be folded at a range of 25mm-85mm
long.
Model No. TUF-40S
Cutting Type Ultrasonic
Folding Width 20-47mm (optimum: 25-45mm)
Folding Length 25-85mm (optimum: 30-70mm)
Label thickness 0.2-0.6mm (optimum: same)
Folding Speed 80-90 cuts/min.
Machine / N.WT 900×800×550mm/82kg Packing / G.WT 3 cartons, 0.42cbm/112kg
Suitable MATERIALS: Woven
label, Printing label, Ribbon tape
-
High Speed It can cut 80-90 cuts per minute.(Holding
length : 70mm)
-
Accuracy A sensor makes cut-length accurate by automatic
sensing at set-position.
-
Cutting type Cutting
edge is soft due to using an ultrasonic system.
-
Cutting shape Centre
folding or 1/3 folding, 3/4 folding is available.
-
Automatic operation It works automatically only by setting
length and quantity.
-
Automatic stacking By
stacker, cut & folded labels are accumulated automatically.
TUC-40SK
ULTRASONIC LABEL CUTTER Strip-labels max. 50mm wide can be cut at a
range of 20mm-1KM.
Model
No. TUC-40SK
Cutting
Type Ultrasonic
Cutting
Width 20-47mm (optimum: 25-45mm)
Cutting
Length 40-110mm (optimum: 50-90mm)
Label
thickness 0.15-0.5mm
(optimim.:0.15-0.35mm)
Cutting
Speed 95-115 cuts/min.
Machine
/ N.WT 400×350×450mm/23.0kg Packing / G.WT 560×440×450mm/27.5kg
SUITABLE
MATERIALS Woven label, Printing
label, Ribbon tape
High
Speed It can cut 95-115 cuts
per minute.(75mm long)
Accuracy A sensor makes cut-length
accurate by automatic sensing at set-position.
The
anti-static brush is useful for cutting labels which generate a lot of static
electricity, preventing cut labels
from
clinging to knife blade.
Cutting
type Cutting edge is soft due to
using an ultrasonic system.
Automatic
operation It works automatically only by setting length and quantity.
TBC-55SK PRINTED LABEL CUTTER W/SENSOR, NEW STACKER(COLD)
Strip-labels
with max. 80mm width can be cut at a range of
30mm~150mm long and then be stacked automatically.
Model
No. TBC-55SK
Cutting
Knife COLD
Available
width 20mm~80mm
Available
Length 30mm~150mm
Cutting
& stacking Quantity/Minute 120cut~140cut
High
Speed It can cut & stack
120~140 cut per minute.(50mm long)
Accuracy Cutting length is accurate owing
to a stepping motor.
Cutting
type Cutting is neat due to
using a cold cutter like scissors and blades are durable because they are made
of
high-speed
steel(HSS).
Automatic
operation It works automatically only by setting length and quantity.
TBC-50SKM LABEL MARKING CUTTER WITH
STACKER
Marking
some letters on a special position of label automatically.
Easy
to use and economical due to a monolithic system of pre-feeder and stacker.
Model
no. TBC-50SKM
Knife Cold
Cut
width Max. 100mm
Max.
stacking 950pcs
Applications Marking date, Lot number, figure etc.
High
speed Mark & cut
120pcs~140pcs/min.(50mm long)
Accuracy Precise mark & cut by a
stepping motor & sensor.
Automation It works automatically only by
setting length and quantity.
TLC-731
MANUAL LABEL
CUTTER
Model
No TLC-731
Name
Of Products MANUAL LABEL CUTTER
Packing
Size 26×15×29cm (1.6/1.9kg)
Application
WOVEN LABEL, PRINTED LABEL
-It
protects workman from the poisonous gas with attached a fan.
-The
work efficiency has been promoted with equipped the ni-chrome wire diagonally.
TLF-730 MANUAL LABEL FOLDER
Model
No TLF-730
Name
Of Products MANUAL LABEL FOLDER
Packing
Size 22×32×22cm (3.2/3.6kg)
Application
WOVEN LABEL
-It
can save wasteful time with the calculator.
-The
heater has a long life span.
-No
trouble due to adoption of a contact-less system.