Bobbin Winders and Bias Tape Cutters
All are available 220v for Europe and 110v for USA and Canada
TC-38A KNIT TAPE CUTTER
Automatic cutting of tubular knitwear with an extra heavy duty winding roller
and a special feeding bar which stops automatically in case of jamming. (Max
width : 110mm)
Model No. TC-38A
Cutting Knife SMILE KNIT TAPE
CUTTER (Cold)
Packing Size 180×48×41cm
(38.4/51.5kg)
Application TUBULAR KNITWEAR, BIAS
TAPE CUTTING
High Speed It can cut max.68m
per minute by adjusting speed rate.
Convenience Unnecessary to change
tape winding roller for all kinds of materials. By adjusting the speed lever,
it can cut any kind of fabric easily regardless of elasticity.
Safety Because the feeding bar is manufactured as a slip-system, it
stops automatically in case of jamming and prevents the motor from overloading
and protects operator's safety.
Noiseless Noise is decreased more than before.
Automatic stopper Volume of winded
tape can be adjusted automatically by Limit switch.
TR-3n THREAD WINDER
Precise split of sewing threads to small lots.
Automatic measurement of thread-winding
Soft sound & long-life span
Model No TR-3n
Name Of Product SAET-BYEOL THREAD
WINDER
Packing Size 48×35×44cm (17.6/19.1kg)
Application SEWING THREAD, EMBROIDERY THREAD
-TR-3 can wind thread as same shape as original cone regardless of
thickness of thread.
-Ceramic guide prevents thread from being weak by frictional heat.
-Because TR-3n calculates the volume of winded thread not by the time,
but by the length of thread, you can wind the required volume exactly.
-Other products are noisy and are worn out heavily in using for a long
time. But in the case of the TR-3n, because its guide-bearing moves through
outside of Heart- shaped cam, it has a long-life span.
-The more it is used, the softer its sound becomes and it is very economical
due to a long life span.
TR-PL SMILE PUNCH
Model No TR-PL
Name Of Product SMILE PUNCH
Packing Size 28×38×28cm (6.3/7.4kg)
Application SNAP BUTTON, EYELET WORKS OF JUMPER,
JACKET, JEAN, COAT, KNITWEAR, LEATHER, BELT, BAG ETC.
-It is possible to reduce the manufacturing process and manpower because
the direct punching work could save the task of position marking.
-It prevents loss by accurate punching because TR-P.1 starts punching work just after pressing and possible to
work, holding materials with one hand.
-TR-PL makes hole neatly due to no dancing of fabric.
-TR-PL prevents shock, noise and possible hand-injuries from hammering.
-Even a beginner can work more efficiently like a skilled workman.